Once again denied…ugh…
CPAN.pm: Going to build L/LU/LUKKA/PDL-1.99989.tar.gz
Checking if your kit is complete…
Looks good
Writing Makefile for PDL::pod
Writing Makefile for PDL::PP
Trying to figure out POSIX threads support …
Saw pthread.h. Fine.
Nope, your perl was not linked against pthread library
==> PDL will be built without POSIX thread support. Shame on you.
Writing Makefile for PDL::Core
Writing Makefile for PDL::Ops
Writing Makefile for PDL::Primitive
Writing Makefile for PDL::Slices
Writing Makefile for PDL::Tests
Using distribution version of functions: ndtri blas eigens simq nan
infinity acosh asinh atanh erf erfc rint j0 j1 y0 y1 jn yn
Using system version of functions:
Writing Makefile for PDL::Math
Writing Makefile for PDL
Writing Makefile for PDL::Demos
Writing Makefile for PDL::Pod::Parser
Writing Makefile for PDL::Doc
Building TriD extension. Turn off WITH_3D if there are problems
Writing Makefile for PDL::Graphics::PGPLOT
Writing Makefile for PDL::Graphics::IIS
Not building PDL::Graphics::Karma, turn on WITH_KARMA if this is
incorrect
Note (probably harmless): No library found for -lMesaGL
Note (probably harmless): No library found for -lMesaGLU
Note (probably harmless): No library found for -lGL
Note (probably harmless): No library found for -lGLU
Writing Makefile for PDL::Graphics::OpenGL
Note (probably harmless): No library found for -lMesaGL
Note (probably harmless): No library found for -lMesaGLU
Note (probably harmless): No library found for -lGL
Note (probably harmless): No library found for -lGLU
Writing Makefile for PDL::Graphics::OpenGLQ
Writing Makefile for PDL::Graphics::TriD::Rout
Writing Makefile for PDL::Graphics::VRML
Writing Makefile for PDL::Graphics::TriD
Writing Makefile for PDL
Writing Makefile for PDL::IO::FastRaw
Writing Makefile for PDL::IO::Misc
Writing Makefile for PDL::IO::FlexRaw
Writing Makefile for PDL::IO::Pnm
Writing Makefile for PDL::IO::Browser
Writing Makefile for PDL::IO::NDF
Writing Makefile for PDL
WARNING: Dir is not a known parameter.
Writing Makefile for PDL::Opt::Simplex
Writing Makefile for PDL::Opt
Writing Makefile for PDL::ImageRGB
(ExtUtils Version 1.08)
Unable to find a fortran compiler using names: g77 f77 fort77 at
ExtUtils/F77.pm line 405.
Compilation failed in require at (eval 105) line 2.
BEGIN failed–compilation aborted at (eval 105) line 2.
ExtUtils::F77 module not found. Will not build PDL::Slatec
Writing Makefile for PDL::FFT
Writing Makefile for PDL::Filter
Writing Makefile for PDL::Image2D
Writing Makefile for PDL::ImageND
Writing Makefile for PDL::CallExt
Writing Makefile for PDL::Lib
Writing Makefile for PDL
Writing Basic/Core/Config.pm
make[1]: Entering directory /home/root/.cpan/build/PDL-1.99989/Basic' cp LiteF.pm ../blib/lib/PDL/LiteF.pm cp default.perldlrc ../blib/lib/PDL/default.perldlrc cp AutoLoader.pm ../blib/lib/PDL/AutoLoader.pm cp PDL.pm ../blib/lib/PDL.pm cp Lite.pm ../blib/lib/PDL/Lite.pm cp Options.pm ../blib/lib/PDL/Options.pm make[2]: Entering directory /home/root/.cpan/build/PDL-1.99989/Basic/Pod’
cp Impatient.pod …/…/blib/lib/PDL/Impatient.pod
cp Internals.pod …/…/blib/lib/PDL/Internals.pod
cp Tips.pod …/…/blib/lib/PDL/Tips.pod
cp Dataflow.pod …/…/blib/lib/PDL/Dataflow.pod
cp Delta.pod …/…/blib/lib/PDL/Delta.pod
cp FAQ.pod …/…/blib/lib/PDL/FAQ.pod
cp Philosophy.pod …/…/blib/lib/PDL/Philosophy.pod
cp Objects.pod …/…/blib/lib/PDL/Objects.pod
cp Indexing.pod …/…/blib/lib/PDL/Indexing.pod
cp Intro.pod …/…/blib/lib/PDL/Intro.pod
cp PP.pod …/…/blib/lib/PDL/PP.pod
Manifying …/…/blib/man1/PDL::Impatient.1
Manifying …/…/blib/man1/PDL::Internals.1
Manifying …/…/blib/man1/PDL::Tips.1
Manifying …/…/blib/man1/PDL::Dataflow.1
Manifying …/…/blib/man1/PDL::Delta.1
Manifying …/…/blib/man1/PDL::Philosophy.1
Manifying …/…/blib/man1/PDL::FAQ.1
Manifying …/…/blib/man1/PDL::Indexing.1
Manifying …/…/blib/man1/PDL::Objects.1
Manifying …/…/blib/man1/pdl.1
Manifying …/…/blib/man1/PDL::PP.1
make[2]: Leaving directory /home/root/.cpan/build/PDL-1.99989/Basic/Pod' make[2]: Entering directory /home/root/.cpan/build/PDL-1.99989/Basic/Gen’
/usr/bin/perl PP/dump.pp > PP/Dump.pm.tmp
mv PP/Dump.pm.tmp PP/Dump.pm
cp PP.pm …/…/blib/lib/PDL/PP.pm
cp PP/Var.pm …/…/blib/lib/PDL/PP/Var.pm
cp PP/CType.pm …/…/blib/lib/PDL/PP/CType.pm
cp PP/PDLCode.pm …/…/blib/lib/PDL/PP/PDLCode.pm
cp PP/SymTab.pm …/…/blib/lib/PDL/PP/SymTab.pm
cp PP/PdlParObj.pm …/…/blib/lib/PDL/PP/PdlParObj.pm
cp PP/Signature.pm …/…/blib/lib/PDL/PP/Signature.pm
cp PP/XS.pm …/…/blib/lib/PDL/PP/XS.pm
cp PP/Dump.pm …/…/blib/lib/PDL/PP/Dump.pm
cp PP/Struct.pm …/…/blib/lib/PDL/PP/Struct.pm
cp PP/Dims.pm …/…/blib/lib/PDL/PP/Dims.pm
Manifying …/…/blib/man3/PDL::PP::Signature.3
Manifying …/…/blib/man3/PDL::PP::Dump.3
make[2]: Leaving directory /home/root/.cpan/build/PDL-1.99989/Basic/Gen' make[2]: Entering directory /home/root/.cpan/build/PDL-1.99989/Basic/Core’
/usr/bin/perl “-I…/…/blib/arch” “-I…/…/blib/lib” Types.pm.PL Types.pm
Extracting Types.pm (with variable substitutions)
/usr/bin/perl “-I…/…/blib/arch” “-I…/…/blib/lib” pdl.h.PL pdl.h
Extracting pdl.h (with variable substitutions)
/usr/bin/perl “-I…/…/blib/arch” “-I…/…/blib/lib” pdlsimple.h.PL
pdlsimple.h
Extracting pdlsimple.h (with variable substitutions)
cp Version.pm …/…/blib/lib/PDL/Version.pm
cp Exporter.pm …/…/blib/lib/PDL/Exporter.pm
cp pdlcore.h …/…/blib/lib/PDL/Core/pdlcore.h
cp Dbg.pm …/…/blib/lib/PDL/Dbg.pm
cp pdlsimple.h …/…/blib/lib/PDL/Core/pdlsimple.h
cp pdl.h …/…/blib/lib/PDL/Core/pdl.h
cp Core.pm …/…/blib/lib/PDL/Core.pm
cp typemap.pdl …/…/blib/lib/PDL/Core/typemap.pdl
cp Config.pm …/…/blib/lib/PDL/Config.pm
cp Types.pm …/…/blib/lib/PDL/Types.pm
cp Basic.pm …/…/blib/lib/PDL/Basic.pm
cp pdlthread.h …/…/blib/lib/PDL/Core/pdlthread.h
cp Dev.pm …/…/blib/lib/PDL/Core/Dev.pm
cp pdlmagic.h …/…/blib/lib/PDL/Core/pdlmagic.h
/usr/bin/perl -e ‘use ExtUtils::Mksymlists;
Mksymlists(“NAME” => “PDL::Core”, “DL_FUNCS” => { }, “FUNCLIST” => ,
“DL_VARS” => );’
/usr/bin/perl /sftw/perl5.8.7/lib/5.8.7/ExtUtils/xsubpp -typemap
/sftw/perl/lib/5.8.7/ExtUtils/typemap -typemap typemap Core.xs > Core.xsc
&& mv Core.xsc Core.c
cc -c -D_ALL_SOURCE -D_ANSI_C_SOURCE -D_POSIX_SOURCE -qmaxmem=-1
-qnoansialias -DUSE_NATIVE_DLOPEN -I/usr/local/include -q32 -D_LARGE_FILES
-qlonglong -O -DVERSION="1.99989" -DXS_VERSION="1.99989"
“-I/sftw/perl/lib/5.8.7/aix/CORE” Core.c
“pdlmagic.h”, line 123.8: 1506-234 (W) Expecting a new-line character on
#endif directive.
“Core.xs”, line 111.26: 1506-045 (S) Undeclared identifier sv_undef.
“Core.xs”, line 617.45: 1506-045 (S) Undeclared identifier na.
make[2]: *** [Core.o] Error 1
make[2]: Leaving directory /home/root/.cpan/build/PDL-1.99989/Basic/Core' make[1]: *** [subdirs] Error 2 make[1]: Leaving directory /home/root/.cpan/build/PDL-1.99989/Basic’
make: *** [subdirs] Error 2
/opt/freeware/bin/make – NOT OK
Running make test
Can’t test without successful make
Running make install
make had returned bad status, install seems impossible
I even went through the trouble of blowing away my perl install, and
compiling without threads to see if it’s a threading issue (same
error)…Sigh… Anyone?
Jonathan Kaufman
Foot Locker Corporate Services, Inc.
Chris Hall
Sent by: rt-users-bounces@lists.bestpractical.com
02/03/2006 05:58 AM
To
rt-users@lists.bestpractical.com
cc
Subject
Re: [rt-users] Scalar::Util::Weak Problem
If you ‘install XS’ it will download PDL-1.99989 for some reason.
Install that, then install scalar-utils again. That seemed to work for me.
jkaufman@footlocker.com wrote:
Hello all,
I am once again attempting (unsuccessfully at the moment) to get RT
3.5.7
installed on AIX. I’m compiling everything from scratch on an AIX v5.2
machine using IBM Vac 7.x.
I’ve compiled Perl v5.8.7 using the following Configure:
sh Configure -des -Dusenm -Dprefix=/sftw/perl -Duseithreads
-Dusemultiplicity -Duseperlio
-Duselargefiles -Dd_sigaction -Dlibpth=‘/lib /usr/lib /usr/ccs/lib’
-Dlibs=‘-lbind -lnsl -ldbm -ldb -ldl -lld -lm -lcrypt -lpthreads -lc
-lbsd
-lPW’
-Dccflags=‘-q32 -D_LARGE_FILES -qlonglong’ -Dlddlflags=‘-bM:SRE -lc_r’
-Dldflags=‘-b32’
I “borrowed” the ccflags/lddlflags/ldflags/libs from the compile flags
used on the perl that ships with Aix v5.2 BTW.
I’ve gotten a number of the perl modules to install, but the Weaken part
of Scalar::Util doesn’t want to compile, and that’s causing other
modules
to barf during their tests. I can only assume that this is an important
part of Scalar::Util and I should try to figure out why it’s not
working…I don’t have a clue, so I’m hoping someone else on the list
knows…
Here is the output during the installation of Scalar::Util
[root@mlwitt30]:[/home/root/.cpan/build/Scalar-List-Utils-1.18] > perl
Makefile.PL
Checking if your kit is complete…
Looks good
Writing Makefile for List::Util
[root@mlwitt30]:[/home/root/.cpan/build/Scalar-List-Utils-1.18] > make
cp lib/List/Util.pm blib/lib/List/Util.pm
cp lib/Scalar/Util.pm blib/lib/Scalar/Util.pm
/usr/bin/perl -Iinc -e 'use ExtUtils::Mksymlists;
Mksymlists(“NAME” => “List::Util”, “DL_FUNCS” => { }, “FUNCLIST” => ,
“DL_VARS” => );’
/usr/bin/perl -Iinc /sftw/perl/lib/5.8.7/ExtUtils/xsubpp -typemap
/sftw/perl/lib/5.8.7/ExtUtils/typemap Util.xs > Util.xsc && mv Util.xsc
Util.c
cc_r -c -q32 -D_LARGE_FILES -qlonglong -D_ALL_SOURCE -D_ANSI_C_SOURCE
-D_POSIX_SOURCE -qmaxmem=-1 -qnoansialias -DUSE_NATIVE_DLOPEN
-DNEED_PTHREAD_INIT -I/usr/local/include -q32 -D_LARGE_FILES -qlonglong
-O
-DVERSION="1.18" -DXS_VERSION="1.18"
“-I/sftw/perl/lib/5.8.7/aix-thread-multi/CORE” -DPERL_EXT Util.c
Running Mkbootstrap for List::Util ()
chmod 644 Util.bs
rm -f blib/arch/auto/List/Util/Util.so
ld -bM:SRE -lc_r -bhalt:4 -bexpall -G -bnoentry -lpthreads -lc Util.o
-o
blib/arch/auto/List/Util/Util.so
\
chmod 755 blib/arch/auto/List/Util/Util.so
cp Util.bs blib/arch/auto/List/Util/Util.bs
chmod 644 blib/arch/auto/List/Util/Util.bs
Manifying blib/man3/List::Util.3
Manifying blib/man3/Scalar::Util.3
[root@mlwitt30]:[/home/root/.cpan/build/Scalar-List-Utils-1.18] > make
test
PERL_DL_NONLAZY=1 /usr/bin/perl “-MExtUtils::Command::MM” “-e”
“test_harness(0, ‘inc’, ‘blib/lib’, ‘blib/arch’)” t/*.t
t/00version…ok
t/blessed…ok
t/dualvar…skipped
all skipped: dualvar requires XS version
t/first…ok
2/17 skipped: Poor man’s MULTICALL can’t cope
t/isvstring…skipped
all skipped: isvstring requires XS version
t/lln…ok
t/max…ok
t/maxstr…ok
t/min…ok
t/minstr…ok
t/openhan…ok
t/p_blessed…ok
t/p_first…ok
t/p_lln…ok
t/p_max…ok
t/p_maxstr…ok
t/p_min…ok
t/p_minstr…ok
t/p_openhan…ok
t/p_readonly…ok
t/p_reduce…ok
t/p_refaddr…ok
t/p_reftype…ok
t/p_shuffle…ok
t/p_sum…ok
t/p_tainted…ok
t/proto…skipped
all skipped: set_prototype requires XS version
t/readonly…ok
t/reduce…ok
2/23 skipped: Poor man’s MULTICALL can’t cope
t/refaddr…ok
t/reftype…ok
t/shuffle…ok
t/sum…ok
t/tainted…ok
t/weak…skipped
all skipped: weaken requires XS version
All tests successful, 4 tests and 4 subtests skipped.
Files=35, Tests=327, 5 wallclock secs ( 2.62 cusr + 2.13 csys = 4.75
CPU)
As you can see, Weak complains about needing the XS version…What’s an
XS
version? in the hopes of shotguning a fix I updated ExtUtils::MakeMaker,
ExtUtils::Cbuilder, XSLoader, Params::Validate…All to no avail.
Any ideas?
Jonathan Kaufman
Foot Locker Corporate Services, Inc.
Visit us on-line at footlocker.com.
The information in this e-mail, and any attachment therein, is
confidential and for use by the addressee only. If you are not the
intended recipient, please return the e-mail to the sender and delete it
from your computer. Although the Company attempts to sweep e-mail and
attachments for viruses, it does not guarantee that either are
virus-free
and accepts no liability for any damage sustained as a result of
viruses.
The rt-users Archives
Be sure to check out the RT Wiki at http://wiki.bestpractical.com
Download a free sample chapter of RT Essentials from O’Reilly Media at
http://rtbook.bestpractical.com
WE’RE COMING TO YOUR TOWN SOON - RT Training in Amsterdam, Boston and
San Francisco - Find out more at
http://bestpractical.com/services/training.html
Chris Hall
FilmLight Ltd
14-15 Manette St
London W1D 4AP
+44 (0)20 7292 0400
http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users
Be sure to check out the RT Wiki at http://wiki.bestpractical.com
Download a free sample chapter of RT Essentials from O’Reilly Media at
http://rtbook.bestpractical.com
WE’RE COMING TO YOUR TOWN SOON - RT Training in Amsterdam, Boston and
San Francisco - Find out more at
http://bestpractical.com/services/training.html
