Problem RTIR Installation -- CPAN's GnuPG::Interface tests failing

I can’t finalize my RTIR installation, as I can’t do a successful
installation of the last of the RTIR prerequisites due to a bunch of
the tests failing for CPAN module GnuPG::Interface. Before posting, I
did consult all the RTIR documentations, and GnuPG website, and CPAN,
etc., and could not find anything addressing the failing test
results…I also note that CPAN’s site claims a 68% success rate (Perl
5.8.8) for tests associated to GnuPG::Interface module. Details are
listed below.

My Setup:
RT 3.8.4
RTFM -2.4.2
Mac OS X 10.5.8
MySQL 5.1.37
Apache/2.2.13 (Unix) mod_perl/2.0.4 Perl/v5.8.8 configured

My Installed Prerequisites (for RTIR):
GnuPG 2.0.13 …(I am planning to use S/MIME, and Gnu’s site
recommended version 2.x as opposed to 1.x of GnuPG)

Concerns:
As I am about to use RTIR for secure purposes, the obvious concern of
mine in the event I do a CPAN '“force install GnuPG::Interface”, is to
get blind-sided with things that I should have not overlooked as a
result of the failing tests.

Misc.
I also attempted to do a CPAN installation of module GnuPG (different
than module GnuPG::Interface)…and of its 25 tests, every single one
failed. For now I am assuming that I don’t need to worry about this
module as a pre-requisite for a successful installation of RTIR (as
GnuPG::Interface should suffice).

Here are the output of my (failing) installation of CPAN module
GnuPG::Interface:

cpan[3]> install GnuPG::Interface
Running install for module 'GnuPG::Interface’
Running make for J/JE/JESSE/GnuPG-Interface-0.36.tar.gz
CPAN: Digest::SHA loaded ok (v5.47)
CPAN: Compress::Zlib loaded ok (v2.02)
Checksum for /usr/local/.cpan/sources/authors/id/J/JE/JESSE/GnuPG-
Interface-0.36.tar.gz ok
Scanning cache /usr/local/.cpan/build for sizes
…DONE
CPAN: Archive::Tar loaded ok (v1.52)
GnuPG-Interface-0.36/
GnuPG-Interface-0.36/ChangeLog
GnuPG-Interface-0.36/COPYING
GnuPG-Interface-0.36/lib/
GnuPG-Interface-0.36/lib/GnuPG/
GnuPG-Interface-0.36/lib/GnuPG/Fingerprint.pm
GnuPG-Interface-0.36/lib/GnuPG/Handles.pm
GnuPG-Interface-0.36/lib/GnuPG/Interface.pm
GnuPG-Interface-0.36/lib/GnuPG/Key.pm
GnuPG-Interface-0.36/lib/GnuPG/Options.pm
GnuPG-Interface-0.36/lib/GnuPG/PrimaryKey.pm
GnuPG-Interface-0.36/lib/GnuPG/PublicKey.pm
GnuPG-Interface-0.36/lib/GnuPG/SecretKey.pm
GnuPG-Interface-0.36/lib/GnuPG/Signature.pm
GnuPG-Interface-0.36/lib/GnuPG/SubKey.pm
GnuPG-Interface-0.36/lib/GnuPG/UserId.pm
GnuPG-Interface-0.36/Makefile.PL
GnuPG-Interface-0.36/MANIFEST
GnuPG-Interface-0.36/META.yml
GnuPG-Interface-0.36/NEWS
GnuPG-Interface-0.36/README
GnuPG-Interface-0.36/SIGNATURE
GnuPG-Interface-0.36/t/
GnuPG-Interface-0.36/t/clearsign.t
GnuPG-Interface-0.36/t/decrypt.t
GnuPG-Interface-0.36/t/detach_sign.t
GnuPG-Interface-0.36/t/encrypt.t
GnuPG-Interface-0.36/t/encrypt_symmetrically.t
GnuPG-Interface-0.36/t/export_keys.t
GnuPG-Interface-0.36/t/Fingerprint.t
GnuPG-Interface-0.36/t/get_public_keys.t
GnuPG-Interface-0.36/t/get_secret_keys.t
GnuPG-Interface-0.36/t/GnuPG/
GnuPG-Interface-0.36/t/GnuPG/ComparableFingerprint.pm
GnuPG-Interface-0.36/t/GnuPG/ComparableKey.pm
GnuPG-Interface-0.36/t/GnuPG/ComparablePrimaryKey.pm
GnuPG-Interface-0.36/t/GnuPG/ComparablePublicKey.pm
GnuPG-Interface-0.36/t/GnuPG/ComparableSecretKey.pm
GnuPG-Interface-0.36/t/GnuPG/ComparableSignature.pm
GnuPG-Interface-0.36/t/GnuPG/ComparableSubKey.pm
GnuPG-Interface-0.36/t/GnuPG/ComparableUserId.pm
GnuPG-Interface-0.36/t/import_keys.t
GnuPG-Interface-0.36/t/Interface.t
GnuPG-Interface-0.36/t/list_public_keys.t
GnuPG-Interface-0.36/t/list_secret_keys.t
GnuPG-Interface-0.36/t/list_sigs.t
GnuPG-Interface-0.36/t/MyTest.pm
GnuPG-Interface-0.36/t/MyTestSpecific.pm
GnuPG-Interface-0.36/t/passphrase_handling.t
GnuPG-Interface-0.36/t/sign.t
GnuPG-Interface-0.36/t/sign_and_encrypt.t
GnuPG-Interface-0.36/t/UserId.t
GnuPG-Interface-0.36/t/verify.t
GnuPG-Interface-0.36/t/wrap_call.t
GnuPG-Interface-0.36/test/
GnuPG-Interface-0.36/test/encrypted.1.gpg
GnuPG-Interface-0.36/test/key.1.asc
GnuPG-Interface-0.36/test/options
GnuPG-Interface-0.36/test/passphrase
GnuPG-Interface-0.36/test/plain.1.txt
GnuPG-Interface-0.36/test/public-keys/
GnuPG-Interface-0.36/test/public-keys/1.0.test
GnuPG-Interface-0.36/test/public-keys/1.1.test
GnuPG-Interface-0.36/test/public-keys/2.0.test
GnuPG-Interface-0.36/test/public-keys/2.1.test
GnuPG-Interface-0.36/test/public-keys-sigs/
GnuPG-Interface-0.36/test/public-keys-sigs/1.0.test
GnuPG-Interface-0.36/test/public-keys-sigs/1.1.test
GnuPG-Interface-0.36/test/public-keys-sigs/2.0.test
GnuPG-Interface-0.36/test/public-keys-sigs/2.1.test
GnuPG-Interface-0.36/test/pubring.gpg
GnuPG-Interface-0.36/test/secret-keys/
GnuPG-Interface-0.36/test/secret-keys/1.0.test
GnuPG-Interface-0.36/test/secret-keys/2.0.test
GnuPG-Interface-0.36/test/secring.gpg
GnuPG-Interface-0.36/test/signed.1.asc
GnuPG-Interface-0.36/THANKS
CPAN: File::Temp loaded ok (v0.22)
CPAN: YAML loaded ok (v0.70)

CPAN.pm: Going to build J/JE/JESSE/GnuPG-Interface-0.36.tar.gz

which gpg … /usr/local/bin/gpg
Checking if your kit is complete…
Looks good
Writing Makefile for GnuPG::Interface
cp lib/GnuPG/Signature.pm blib/lib/GnuPG/Signature.pm
cp lib/GnuPG/Interface.pm blib/lib/GnuPG/Interface.pm
AutoSplitting blib/lib/GnuPG/Interface.pm (blib/lib/auto/GnuPG/
Interface)
blib/lib/GnuPG/Interface.pm: some names are not unique when truncated
to 8 characters:
directory blib/lib/auto/GnuPG/Interface:
get_public_keys.al, get_public_keys_with_sigs.al truncate to get_publ
cp lib/GnuPG/SubKey.pm blib/lib/GnuPG/SubKey.pm
cp lib/GnuPG/PrimaryKey.pm blib/lib/GnuPG/PrimaryKey.pm
cp lib/GnuPG/Handles.pm blib/lib/GnuPG/Handles.pm
cp lib/GnuPG/SecretKey.pm blib/lib/GnuPG/SecretKey.pm
cp lib/GnuPG/Key.pm blib/lib/GnuPG/Key.pm
cp lib/GnuPG/UserId.pm blib/lib/GnuPG/UserId.pm
cp lib/GnuPG/Fingerprint.pm blib/lib/GnuPG/Fingerprint.pm
cp lib/GnuPG/Options.pm blib/lib/GnuPG/Options.pm
cp lib/GnuPG/PublicKey.pm blib/lib/GnuPG/PublicKey.pm
Manifying blib/man3/GnuPG::Signature.3pm
Manifying blib/man3/GnuPG::Interface.3pm
Manifying blib/man3/GnuPG::PrimaryKey.3pm
Manifying blib/man3/GnuPG::SubKey.3pm
Manifying blib/man3/GnuPG::Handles.3pm
Manifying blib/man3/GnuPG::Key.3pm
Manifying blib/man3/GnuPG::SecretKey.3pm
Manifying blib/man3/GnuPG::Fingerprint.3pm
Manifying blib/man3/GnuPG::UserId.3pm
Manifying blib/man3/GnuPG::PublicKey.3pm
Manifying blib/man3/GnuPG::Options.3pm
JESSE/GnuPG-Interface-0.36.tar.gz
/usr/bin/make – OK
Running make test
PERL_DL_NONLAZY=1 /usr/bin/perl “-MExtUtils::Command::MM” “-e”
“test_harness(0, ‘blib/lib’, ‘blib/arch’)” t/*.t
t/clearsign.t … ok
t/decrypt.t … ok
t/detach_sign.t … ok
t/encrypt.t … 1/3 gpg: WARNING: unsafe permissions on
homedir test' t/encrypt.t ................ ok t/encrypt_symmetrically.t .. ok t/export_keys.t ............ ok t/Fingerprint.t ............ ok t/get_public_keys.t ........ gpg: WARNING: unsafe permissions on homedirtest’
t/get_public_keys.t … 1/3 subkeys fail comparison; this is a
known issue with GnuPG 1.0.1 at t/get_public_keys.t line 92.
t/get_public_keys.t … Failed 3/3 subtests
t/get_secret_keys.t … gpg: WARNING: unsafe permissions on
homedir test' t/get_secret_keys.t ........ Failed 2/2 subtests t/import_keys.t ............ ok t/Interface.t .............. ok t/list_public_keys.t ....... ok t/list_secret_keys.t ....... ok t/list_sigs.t .............. ok t/passphrase_handling.t .... 1/3 gpg: WARNING: unsafe permissions on homedirtest’
t/passphrase_handling.t … ok
t/sign.t … ok
t/sign_and_encrypt.t … ok
t/UserId.t … ok
t/verify.t … ok
t/wrap_call.t … ok

Test Summary Report
t/get_public_keys.t (Wstat: 0 Tests: 3 Failed: 3)
Failed tests: 1-3
t/get_secret_keys.t (Wstat: 0 Tests: 2 Failed: 2)
Failed tests: 1-2
Files=20, Tests=51, 2 wallclock secs ( 0.07 usr 0.06 sys + 1.27
cusr 0.39 csys = 1.79 CPU)
Result: FAIL
Failed 2/20 test programs. 5/51 subtests failed.
make: *** [test_dynamic] Error 255
JESSE/GnuPG-Interface-0.36.tar.gz
/usr/bin/make test – NOT OK
//hint// to see the cpan-testers results for installing this module,
try:
reports JESSE/GnuPG-Interface-0.36.tar.gz
Running make install
make test had returned bad status, won’t install without force
Failed during this command:
JESSE/GnuPG-Interface-0.36.tar.gz : make_test NO

Thanks,
Behzad

I can’t finalize my RTIR installation, as I can’t do a successful
installation of the last of the RTIR prerequisites due to a bunch of
the tests failing for CPAN module GnuPG::Interface. Before posting, I
did consult all the RTIR documentations, and GnuPG website, and CPAN,
etc., and could not find anything addressing the failing test
results…I also note that CPAN’s site claims a 68% success rate (Perl
5.8.8) for tests associated to GnuPG::Interface module. Details are
listed below.

Diagnosing your failure is difficult without more information about
why it is failing.

Download the module and do the install manually,
perl Makefile.PL
make test
prove -lv t/anything_that_fails

-kevin

Here are the results of the manual install associated to “prove -lv t/
anythiing_that_fails” for all of the failing tests (‘perl
Makefile.PL’ & ‘make test’ steps resulted in the same output as I had
already reported in my earlier email):

$ sudo prove -lv t/encrypt.t
t/encrypt.t …
1…3
Can’t locate auto/GnuPG/Interface/autosplit.ix in @INC (@INC
contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
Library/Perl/5.8.1 .) at /System/Library/Perl/5.8.8/AutoLoader.pm line
160.
at /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib/GnuPG/
Interface.pm line 22
Can’t locate auto/GnuPG/Interface/encrypt.al in @INC (@INC contains: ./
t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /Library/Perl/
Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/Updates/5.8.8 /
System/Library/Perl/5.8.8/darwin-thread-multi-2level /System/Library/
Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-multi-2level /Library/
Perl/5.8.8 /Library/Perl /Network/Library/Perl/5.8.8/darwin-thread-
multi-2level /Network/Library/Perl/5.8.8 /Network/Library/Perl /System/
Library/Perl/Extras/5.8.8/darwin-thread-multi-2level /System/Library/
Perl/Extras/5.8.8 /Library/Perl/5.8.6 /Library/Perl/5.8.1 .) at t/
encrypt.t line 21
Dubious, test returned 2 (wstat 512, 0x200)
Failed 3/3 subtests

Test Summary Report
t/encrypt.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 3 tests but ran 0.
Files=1, Tests=0, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.05 cusr
0.00 csys = 0.07 CPU)
Result: FAIL

$ sudo prove -lv t/get_public_keys.t
t/get_public_keys.t …
1…3
Can’t locate auto/GnuPG/Interface/autosplit.ix in @INC (@INC
contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
Library/Perl/5.8.1 .) at /System/Library/Perl/5.8.8/AutoLoader.pm line
160.
at /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib/GnuPG/
Interface.pm line 22
Can’t locate auto/GnuPG/Interface/get_public_.al in @INC (@INC
contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
Library/Perl/5.8.1 .) at t/get_public_keys.t line 22
Dubious, test returned 2 (wstat 512, 0x200)
Failed 3/3 subtests

Test Summary Report
t/get_public_keys.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 3 tests but ran 0.
Files=1, Tests=0, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.05 cusr
0.01 csys = 0.08 CPU)
Result: FAIL

$ sudo prove -lv t/get_secret_keys.t
t/get_secret_keys.t …
1…2
Can’t locate auto/GnuPG/Interface/autosplit.ix in @INC (@INC
contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
Library/Perl/5.8.1 .) at /System/Library/Perl/5.8.8/AutoLoader.pm line
160.
at /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib/GnuPG/
Interface.pm line 22
Can’t locate auto/GnuPG/Interface/get_secret_.al in @INC (@INC
contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
Library/Perl/5.8.1 .) at t/get_secret_keys.t line 21
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/2 subtests

Test Summary Report
t/get_secret_keys.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 2 tests but ran 0.
Files=1, Tests=0, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.05 cusr
0.00 csys = 0.07 CPU)
Result: FAIL

$ sudo prove -lv t/passphrase_handling.t
t/passphrase_handling.t …
1…3
Can’t locate auto/GnuPG/Interface/autosplit.ix in @INC (@INC
contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
Library/Perl/5.8.1 .) at /System/Library/Perl/5.8.8/AutoLoader.pm line
160.
at /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib/GnuPG/
Interface.pm line 22
Can’t locate auto/GnuPG/Interface/test_defaul.al in @INC (@INC
contains: ./t /usr/local/.cpan/build/GnuPG-Interface-0.36-04tjP6/lib /
Library/Perl/Updates/5.8.8/darwin-thread-multi-2level /Library/Perl/
Updates/5.8.8 /System/Library/Perl/5.8.8/darwin-thread-multi-2level /
System/Library/Perl/5.8.8 /Library/Perl/5.8.8/darwin-thread-
multi-2level /Library/Perl/5.8.8 /Library/Perl /Network/Library/Perl/
5.8.8/darwin-thread-multi-2level /Network/Library/Perl/5.8.8 /Network/
Library/Perl /System/Library/Perl/Extras/5.8.8/darwin-thread-
multi-2level /System/Library/Perl/Extras/5.8.8 /Library/Perl/5.8.6 /
Library/Perl/5.8.1 .) at t/passphrase_handling.t line 18
Dubious, test returned 2 (wstat 512, 0x200)
Failed 3/3 subtests

Test Summary Report
t/passphrase_handling.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 3 tests but ran 0.
Files=1, Tests=0, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.04 cusr
0.00 csys = 0.06 CPU)
Result: FAIL

-BehzadOn Sep 22, 2009, at 12:19 PM, Kevin Falcone wrote:

On Tue, Sep 22, 2009 at 11:06:57AM -0700, Behzad Mahini wrote:

I can’t finalize my RTIR installation, as I can’t do a successful
installation of the last of the RTIR prerequisites due to a bunch of
the tests failing for CPAN module GnuPG::Interface. Before posting, I
did consult all the RTIR documentations, and GnuPG website, and CPAN,
etc., and could not find anything addressing the failing test
results…I also note that CPAN’s site claims a 68% success rate
(Perl
5.8.8) for tests associated to GnuPG::Interface module. Details are
listed below.

Diagnosing your failure is difficult without more information about
why it is failing.

Download the module and do the install manually,
perl Makefile.PL
make test
prove -lv t/anything_that_fails

-kevin

My Setup:

RT 3.8.4
RTFM -2.4.2
Mac OS X 10.5.8
MySQL 5.1.37
Apache/2.2.13 (Unix) mod_perl/2.0.4 Perl/v5.8.8 configured

My Installed Prerequisites (for RTIR):

GnuPG 2.0.13 …(I am planning to use S/MIME, and Gnu’s site
recommended version 2.x as opposed to 1.x of GnuPG)

Concerns:

As I am about to use RTIR for secure purposes, the obvious concern of
mine in the event I do a CPAN '“force install GnuPG::Interface”, is
to
get blind-sided with things that I should have not overlooked as a
result of the failing tests.

Misc.

I also attempted to do a CPAN installation of module GnuPG (different
than module GnuPG::Interface)…and of its 25 tests, every single one
failed. For now I am assuming that I don’t need to worry about this
module as a pre-requisite for a successful installation of RTIR (as
GnuPG::Interface should suffice).

Here are the output of my (failing) installation of CPAN module
GnuPG::Interface:

cpan[3]> install GnuPG::Interface
Running install for module 'GnuPG::Interface’
Running make for J/JE/JESSE/GnuPG-Interface-0.36.tar.gz
CPAN: Digest::SHA loaded ok (v5.47)
CPAN: Compress::Zlib loaded ok (v2.02)
Checksum for /usr/local/.cpan/sources/authors/id/J/JE/JESSE/GnuPG-
Interface-0.36.tar.gz ok
Scanning cache /usr/local/.cpan/build for sizes
…DONE
CPAN: Archive::Tar loaded ok (v1.52)
GnuPG-Interface-0.36/
GnuPG-Interface-0.36/ChangeLog
GnuPG-Interface-0.36/COPYING
GnuPG-Interface-0.36/lib/
GnuPG-Interface-0.36/lib/GnuPG/
GnuPG-Interface-0.36/lib/GnuPG/Fingerprint.pm
GnuPG-Interface-0.36/lib/GnuPG/Handles.pm
GnuPG-Interface-0.36/lib/GnuPG/Interface.pm
GnuPG-Interface-0.36/lib/GnuPG/Key.pm
GnuPG-Interface-0.36/lib/GnuPG/Options.pm
GnuPG-Interface-0.36/lib/GnuPG/PrimaryKey.pm
GnuPG-Interface-0.36/lib/GnuPG/PublicKey.pm
GnuPG-Interface-0.36/lib/GnuPG/SecretKey.pm
GnuPG-Interface-0.36/lib/GnuPG/Signature.pm
GnuPG-Interface-0.36/lib/GnuPG/SubKey.pm
GnuPG-Interface-0.36/lib/GnuPG/UserId.pm
GnuPG-Interface-0.36/Makefile.PL
GnuPG-Interface-0.36/MANIFEST
GnuPG-Interface-0.36/META.yml
GnuPG-Interface-0.36/NEWS
GnuPG-Interface-0.36/README
GnuPG-Interface-0.36/SIGNATURE
GnuPG-Interface-0.36/t/
GnuPG-Interface-0.36/t/clearsign.t
GnuPG-Interface-0.36/t/decrypt.t
GnuPG-Interface-0.36/t/detach_sign.t
GnuPG-Interface-0.36/t/encrypt.t
GnuPG-Interface-0.36/t/encrypt_symmetrically.t
GnuPG-Interface-0.36/t/export_keys.t
GnuPG-Interface-0.36/t/Fingerprint.t
GnuPG-Interface-0.36/t/get_public_keys.t
GnuPG-Interface-0.36/t/get_secret_keys.t
GnuPG-Interface-0.36/t/GnuPG/
GnuPG-Interface-0.36/t/GnuPG/ComparableFingerprint.pm
GnuPG-Interface-0.36/t/GnuPG/ComparableKey.pm
GnuPG-Interface-0.36/t/GnuPG/ComparablePrimaryKey.pm
GnuPG-Interface-0.36/t/GnuPG/ComparablePublicKey.pm
GnuPG-Interface-0.36/t/GnuPG/ComparableSecretKey.pm
GnuPG-Interface-0.36/t/GnuPG/ComparableSignature.pm
GnuPG-Interface-0.36/t/GnuPG/ComparableSubKey.pm
GnuPG-Interface-0.36/t/GnuPG/ComparableUserId.pm
GnuPG-Interface-0.36/t/import_keys.t
GnuPG-Interface-0.36/t/Interface.t
GnuPG-Interface-0.36/t/list_public_keys.t
GnuPG-Interface-0.36/t/list_secret_keys.t
GnuPG-Interface-0.36/t/list_sigs.t
GnuPG-Interface-0.36/t/MyTest.pm
GnuPG-Interface-0.36/t/MyTestSpecific.pm
GnuPG-Interface-0.36/t/passphrase_handling.t
GnuPG-Interface-0.36/t/sign.t
GnuPG-Interface-0.36/t/sign_and_encrypt.t
GnuPG-Interface-0.36/t/UserId.t
GnuPG-Interface-0.36/t/verify.t
GnuPG-Interface-0.36/t/wrap_call.t
GnuPG-Interface-0.36/test/
GnuPG-Interface-0.36/test/encrypted.1.gpg
GnuPG-Interface-0.36/test/key.1.asc
GnuPG-Interface-0.36/test/options
GnuPG-Interface-0.36/test/passphrase
GnuPG-Interface-0.36/test/plain.1.txt
GnuPG-Interface-0.36/test/public-keys/
GnuPG-Interface-0.36/test/public-keys/1.0.test
GnuPG-Interface-0.36/test/public-keys/1.1.test
GnuPG-Interface-0.36/test/public-keys/2.0.test
GnuPG-Interface-0.36/test/public-keys/2.1.test
GnuPG-Interface-0.36/test/public-keys-sigs/
GnuPG-Interface-0.36/test/public-keys-sigs/1.0.test
GnuPG-Interface-0.36/test/public-keys-sigs/1.1.test
GnuPG-Interface-0.36/test/public-keys-sigs/2.0.test
GnuPG-Interface-0.36/test/public-keys-sigs/2.1.test
GnuPG-Interface-0.36/test/pubring.gpg
GnuPG-Interface-0.36/test/secret-keys/
GnuPG-Interface-0.36/test/secret-keys/1.0.test
GnuPG-Interface-0.36/test/secret-keys/2.0.test
GnuPG-Interface-0.36/test/secring.gpg
GnuPG-Interface-0.36/test/signed.1.asc
GnuPG-Interface-0.36/THANKS
CPAN: File::Temp loaded ok (v0.22)
CPAN: YAML loaded ok (v0.70)

CPAN.pm: Going to build J/JE/JESSE/GnuPG-Interface-0.36.tar.gz

which gpg … /usr/local/bin/gpg
Checking if your kit is complete…
Looks good
Writing Makefile for GnuPG::Interface
cp lib/GnuPG/Signature.pm blib/lib/GnuPG/Signature.pm
cp lib/GnuPG/Interface.pm blib/lib/GnuPG/Interface.pm
AutoSplitting blib/lib/GnuPG/Interface.pm (blib/lib/auto/GnuPG/
Interface)
blib/lib/GnuPG/Interface.pm: some names are not unique when truncated
to 8 characters:
directory blib/lib/auto/GnuPG/Interface:
get_public_keys.al, get_public_keys_with_sigs.al truncate to
get_publ
cp lib/GnuPG/SubKey.pm blib/lib/GnuPG/SubKey.pm
cp lib/GnuPG/PrimaryKey.pm blib/lib/GnuPG/PrimaryKey.pm
cp lib/GnuPG/Handles.pm blib/lib/GnuPG/Handles.pm
cp lib/GnuPG/SecretKey.pm blib/lib/GnuPG/SecretKey.pm
cp lib/GnuPG/Key.pm blib/lib/GnuPG/Key.pm
cp lib/GnuPG/UserId.pm blib/lib/GnuPG/UserId.pm
cp lib/GnuPG/Fingerprint.pm blib/lib/GnuPG/Fingerprint.pm
cp lib/GnuPG/Options.pm blib/lib/GnuPG/Options.pm
cp lib/GnuPG/PublicKey.pm blib/lib/GnuPG/PublicKey.pm
Manifying blib/man3/GnuPG::Signature.3pm
Manifying blib/man3/GnuPG::Interface.3pm
Manifying blib/man3/GnuPG::PrimaryKey.3pm
Manifying blib/man3/GnuPG::SubKey.3pm
Manifying blib/man3/GnuPG::Handles.3pm
Manifying blib/man3/GnuPG::Key.3pm
Manifying blib/man3/GnuPG::SecretKey.3pm
Manifying blib/man3/GnuPG::Fingerprint.3pm
Manifying blib/man3/GnuPG::UserId.3pm
Manifying blib/man3/GnuPG::PublicKey.3pm
Manifying blib/man3/GnuPG::Options.3pm
JESSE/GnuPG-Interface-0.36.tar.gz
/usr/bin/make – OK
Running make test
PERL_DL_NONLAZY=1 /usr/bin/perl “-MExtUtils::Command::MM” “-e”
“test_harness(0, ‘blib/lib’, ‘blib/arch’)” t/*.t
t/clearsign.t … ok
t/decrypt.t … ok
t/detach_sign.t … ok
t/encrypt.t … 1/3 gpg: WARNING: unsafe permissions on
homedir test' t/encrypt.t ................ ok t/encrypt_symmetrically.t .. ok t/export_keys.t ............ ok t/Fingerprint.t ............ ok t/get_public_keys.t ........ gpg: WARNING: unsafe permissions on homedirtest’
t/get_public_keys.t … 1/3 subkeys fail comparison; this is a
known issue with GnuPG 1.0.1 at t/get_public_keys.t line 92.
t/get_public_keys.t … Failed 3/3 subtests
t/get_secret_keys.t … gpg: WARNING: unsafe permissions on
homedir test' t/get_secret_keys.t ........ Failed 2/2 subtests t/import_keys.t ............ ok t/Interface.t .............. ok t/list_public_keys.t ....... ok t/list_secret_keys.t ....... ok t/list_sigs.t .............. ok t/passphrase_handling.t .... 1/3 gpg: WARNING: unsafe permissions on homedirtest’
t/passphrase_handling.t … ok
t/sign.t … ok
t/sign_and_encrypt.t … ok
t/UserId.t … ok
t/verify.t … ok
t/wrap_call.t … ok

Test Summary Report

t/get_public_keys.t (Wstat: 0 Tests: 3 Failed: 3)
Failed tests: 1-3
t/get_secret_keys.t (Wstat: 0 Tests: 2 Failed: 2)
Failed tests: 1-2
Files=20, Tests=51, 2 wallclock secs ( 0.07 usr 0.06 sys + 1.27
cusr 0.39 csys = 1.79 CPU)
Result: FAIL
Failed 2/20 test programs. 5/51 subtests failed.
make: *** [test_dynamic] Error 255
JESSE/GnuPG-Interface-0.36.tar.gz
/usr/bin/make test – NOT OK
//hint// to see the cpan-testers results for installing this module,
try:
reports JESSE/GnuPG-Interface-0.36.tar.gz
Running make install
make test had returned bad status, won’t install without force
Failed during this command:
JESSE/GnuPG-Interface-0.36.tar.gz : make_test NO

=======

Thanks,
Behzad


http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sales@bestpractical.com

Discover RT’s hidden secrets with RT Essentials from O’Reilly Media.
Buy a copy at http://rtbook.bestpractical.com


http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sales@bestpractical.com

Discover RT’s hidden secrets with RT Essentials from O’Reilly Media.
Buy a copy at http://rtbook.bestpractical.com

Here are the results of the manual install associated to “prove -lv t/
anythiing_that_fails” for all of the failing tests (‘perl
Makefile.PL’ & ‘make test’ steps resulted in the same output as I had
already reported in my earlier email):

Try out http://search.cpan.org/~jesse/GnuPG-Interface-0.40_04/ instead
of 0.36 and tell us how it does.

Here are the results of the manual install associated to “prove -lv t/
anythiing_that_fails” for all of the failing tests (‘perl
Makefile.PL’ & ‘make test’ steps resulted in the same output as I had
already reported in my earlier email):

Try prove -bv t/somethingthatfails.t
I forgot there were shared libs and not just perl libs in there,
but also, Jesse’s comments about the dev release could be interesting.

-kevin

Results of ‘prove -bv t/some_failing_test’ (for all of the failed
cases)… Based on what I am seeing in the following output, I’ll wait
for your response before I try Jesse’s suggestion about the dev
release (GnuPG-Interface-040.x Devel version).

$ sudo prove -bv t/encrypt.t
t/encrypt.t …
1…3
ok 1
gpg: WARNING: unsafe permissions on homedir `test’
ok 2
ok 3
ok
All tests successful.
Files=1, Tests=3, 1 wallclock secs ( 0.02 usr 0.00 sys + 0.08 cusr
0.03 csys = 0.13 CPU)
Result: PASS

$ sudo prove -bv t/get_public_keys.t
t/get_public_keys.t …
1…3
gpg: WARNING: unsafe permissions on homedir `test’
not ok 1
not ok 2
not ok 3
subkeys fail comparison; this is a known issue with GnuPG 1.0.1 at t/
get_public_keys.t line 92.
Failed 3/3 subtests

Test Summary Report
t/get_public_keys.t (Wstat: 0 Tests: 3 Failed: 3)
Failed tests: 1-3
Files=1, Tests=3, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.06 cusr
0.01 csys = 0.09 CPU)
Result: FAIL

$ sudo prove -bv t/get_secret_keys.t
t/get_secret_keys.t …
1…2
gpg: WARNING: unsafe permissions on homedir `test’
not ok 1
not ok 2
Failed 2/2 subtests

Test Summary Report
t/get_secret_keys.t (Wstat: 0 Tests: 2 Failed: 2)
Failed tests: 1-2
Files=1, Tests=2, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.06 cusr
0.01 csys = 0.09 CPU)
Result: FAIL

sudo prove -bv t/passphrase_handling.t
t/passphrase_handling.t …
1…3
ok 1
ok 2
gpg: WARNING: unsafe permissions on homedir `test’
ok 3
ok
All tests successful.
Files=1, Tests=3, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.08 cusr
0.02 csys = 0.12 CPU)
Result: PASS

-BehzadOn Sep 22, 2009, at 2:12 PM, Kevin Falcone wrote:

On Tue, Sep 22, 2009 at 01:50:27PM -0700, Behzad Mahini wrote:

Here are the results of the manual install associated to “prove -lv
t/
anythiing_that_fails” for all of the failing tests (‘perl
Makefile.PL’ & ‘make test’ steps resulted in the same output as I had
already reported in my earlier email):

Try prove -bv t/somethingthatfails.t
I forgot there were shared libs and not just perl libs in there,
but also, Jesse’s comments about the dev release could be interesting.

-kevin


http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sales@bestpractical.com

Discover RT’s hidden secrets with RT Essentials from O’Reilly Media.
Buy a copy at http://rtbook.bestpractical.com

I attempted to manually install “GnuPG-Interface-040_04” ( 1–perl
Makefile.PL 2-- make test,…), and it also failed during the ‘make
test’ phase and hence no installation. Warning/Error messages were
pretty much similar to the ‘make test’ phase of ‘GnuPG-
Interface-0.36’ (with the exception that a lot of CPAN dependencies
for this module needed to get installed manually --listed below). Test
failure results are shown below, as well as a few other notes

  1. GnuPG Pre-requisite for my box
    gpg2 (instead of gpg) – gnupg-2.0.13 (http://www.gnupg.org/)

  2. Results of “make test”

$ sudo make test
cp lib/GnuPG/Signature.pm blib/lib/GnuPG/Signature.pm
cp lib/GnuPG/Interface.pm blib/lib/GnuPG/Interface.pm
AutoSplitting blib/lib/GnuPG/Interface.pm (blib/lib/auto/GnuPG/
Interface)
blib/lib/GnuPG/Interface.pm: some names are not unique when truncated
to 8 characters:
directory blib/lib/auto/GnuPG/Interface:
get_public_keys.al, get_public_keys_with_sigs.al truncate to get_publ
cp lib/GnuPG/PrimaryKey.pm blib/lib/GnuPG/PrimaryKey.pm
cp lib/GnuPG/SubKey.pm blib/lib/GnuPG/SubKey.pm
cp lib/GnuPG/Handles.pm blib/lib/GnuPG/Handles.pm
cp lib/GnuPG/HashInit.pm blib/lib/GnuPG/HashInit.pm
cp lib/GnuPG/Key.pm blib/lib/GnuPG/Key.pm
cp lib/GnuPG/SecretKey.pm blib/lib/GnuPG/SecretKey.pm
cp lib/GnuPG/Fingerprint.pm blib/lib/GnuPG/Fingerprint.pm
cp lib/GnuPG/UserId.pm blib/lib/GnuPG/UserId.pm
cp lib/GnuPG/PublicKey.pm blib/lib/GnuPG/PublicKey.pm
cp lib/GnuPG/Options.pm blib/lib/GnuPG/Options.pm
PERL_DL_NONLAZY=1 /usr/bin/perl “-MExtUtils::Command::MM” “-e”
“test_harness(0, ‘inc’, ‘blib/lib’, ‘blib/arch’)” t/*.t
t/clearsign.t … ok
t/decrypt.t … ok
t/detach_sign.t … ok
t/encrypt.t … 1/3 gpg: WARNING: unsafe permissions on
homedir test' t/encrypt.t ................ ok t/encrypt_symmetrically.t .. ok t/export_keys.t ............ ok t/Fingerprint.t ............ ok t/get_public_keys.t ........ gpg: WARNING: unsafe permissions on homedirtest’
t/get_public_keys.t … 1/3 subkeys fail comparison; this is a
known issue with GnuPG 1.0.1 at t/get_public_keys.t line 92.
t/get_public_keys.t … Failed 3/3 subtests
t/get_secret_keys.t … gpg: WARNING: unsafe permissions on
homedir test' t/get_secret_keys.t ........ Failed 2/2 subtests t/import_keys.t ............ ok t/Interface.t .............. ok t/list_public_keys.t ....... ok t/list_secret_keys.t ....... ok t/list_sigs.t .............. ok t/passphrase_handling.t .... 1/3 gpg: WARNING: unsafe permissions on homedirtest’
t/passphrase_handling.t … ok
t/sign.t … ok
t/sign_and_encrypt.t … ok
t/UserId.t … ok
t/verify.t … ok
t/wrap_call.t … ok

Test Summary Report
t/get_public_keys.t (Wstat: 0 Tests: 3 Failed: 3)
Failed tests: 1-3
t/get_secret_keys.t (Wstat: 0 Tests: 2 Failed: 2)
Failed tests: 1-2
Files=20, Tests=51, 2 wallclock secs ( 0.07 usr 0.05 sys + 1.47
cusr 0.43 csys = 2.02 CPU)
Result: FAIL
Failed 2/20 test programs. 5/51 subtests failed.
make: *** [test_dynamic] Error 255

  1. Results of the ‘prove -blv t/some_failing_test’ (Note: I combined
    flags “b” & “l” together) – for all Warnings/Error cases

$ sudo prove -blv t/encrypt.t
Password:
t/encrypt.t …
1…3
ok 1
gpg: WARNING: unsafe permissions on homedir `test’
ok 2
ok 3
ok
All tests successful.
Files=1, Tests=3, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.10 cusr
0.04 csys = 0.16 CPU)
Result: PASS

$ sudo prove -blv t/get_public_keys.t
t/get_public_keys.t …
1…3
gpg: WARNING: unsafe permissions on homedir `test’
not ok 1
not ok 2
not ok 3
subkeys fail comparison; this is a known issue with GnuPG 1.0.1 at t/
get_public_keys.t line 92.
Failed 3/3 subtests

Test Summary Report
t/get_public_keys.t (Wstat: 0 Tests: 3 Failed: 3)
Failed tests: 1-3
Files=1, Tests=3, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.07 cusr
0.01 csys = 0.10 CPU)
Result: FAIL

$ sudo prove -blv t/get_secret_keys.t
t/get_secret_keys.t …
1…2
gpg: WARNING: unsafe permissions on homedir `test’
not ok 1
not ok 2
Failed 2/2 subtests

Test Summary Report
t/get_secret_keys.t (Wstat: 0 Tests: 2 Failed: 2)
Failed tests: 1-2
Files=1, Tests=2, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.07 cusr
0.01 csys = 0.10 CPU)
Result: FAIL

$ sudo prove -blv t/passphrase_handling.t
t/passphrase_handling.t …
1…3
ok 1
ok 2
gpg: WARNING: unsafe permissions on homedir `test’
ok 3
ok
All tests successful.
Files=1, Tests=3, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.09 cusr
0.02 csys = 0.13 CPU)
Result: PASS

  1. CPAN dependencies that Must get installed manually before "GnuPG-
    Interface-040_04 provides any “make test” error messages:

Any::Moose
Mouse
MRO::Compat
Class::MOP
Moose
Class::Method::Modifiers::Fast
Class::Method::Modifiers
Test::Output
Declare::Constraints::Simple

-Behzad

$ sudo prove -blv t/get_public_keys.t
t/get_public_keys.t …
1…3
gpg: WARNING: unsafe permissions on homedir `test’
not ok 1
not ok 2
not ok 3
subkeys fail comparison; this is a known issue with GnuPG 1.0.1 at t/
get_public_keys.t line 92.
Failed 3/3 subtests

Test Summary Report

Can you try to track down the source of that gpg warning? I suspect that
it might be umask related. It may be that GnuPG 2.0 is being stricter
about something for homedir permissions.

May be setting umask to a stricter value will make all those tests pass.On Wed, Sep 23, 2009 at 5:02 PM, Jesse Vincent jesse@bestpractical.com wrote:

$ sudo prove -blv t/get_public_keys.t
t/get_public_keys.t …
1…3
gpg: WARNING: unsafe permissions on homedir `test’
not ok 1
not ok 2
not ok 3
subkeys fail comparison; this is a known issue with GnuPG 1.0.1 at t/
get_public_keys.t line 92.
Failed 3/3 subtests

Test Summary Report

Can you try to track down the source of that gpg warning? I suspect that
it might be umask related. It may be that GnuPG 2.0 is being stricter
about something for homedir permissions.


http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sales@bestpractical.com

Discover RT’s hidden secrets with RT Essentials from O’Reilly Media.
Buy a copy at http://rtbook.bestpractical.com

Best regards, Ruslan.

Ok, I made the umask to be strict on the entire ‘test’ directory
(recursively), and ran the “make test”, and then "prove -lbv
failing_cases "…and some of the warnings/errors went away. However,
there are still some more errors left (See Results shown below).

Since some of these errors (See Results below) are indicating that
they are known issues with GnuPG 1.0.1, it begs the following questions:

1) What is the significance of the term "...known issues with GnuPG  

1.0.1…" (i.e., known to RT developers? or known to the GnuPG
developers?)

2) I have installed GnuPG 2.0.13, and do not have GnuPG 1.xx  

installed on my machine. Therefore why is it complaining about GnuPG
1.0.1? Again, note that I have only created a symbolic link for the
executable “gpg” (supposedly the executable for GnuPG 1.x) to point
to “gpg2” (GnuPG 2.0.13). I only did this as “perl Malefile.PL” for
CPAN’s GnuPG-Interface would not have gone ahead, as it obviously
needed “gpg”.

Results of “make test”
/usr/local/.cpan/build/GnuPG-Interface-0.40_04
sh-3.2# make test
PERL_DL_NONLAZY=1 /usr/bin/perl “-MExtUtils::Command::MM” “-e”
“test_harness(0, ‘inc’, ‘blib/lib’, ‘blib/arch’)” t/*.t
t/clearsign.t … ok
t/decrypt.t … ok
t/detach_sign.t … ok
t/encrypt.t … ok
t/encrypt_symmetrically.t … ok
t/export_keys.t … ok
t/Fingerprint.t … ok
t/get_public_keys.t … 1/3 subkeys fail comparison; this is a
known issue with GnuPG 1.0.1 at t/get_public_keys.t line 92.
t/get_public_keys.t … Failed 3/3 subtests
t/get_secret_keys.t … Failed 2/2 subtests
t/import_keys.t … ok
t/Interface.t … ok
t/list_public_keys.t … ok
t/list_secret_keys.t … ok
t/list_sigs.t … ok
t/passphrase_handling.t … ok
t/sign.t … ok
t/sign_and_encrypt.t … ok
t/UserId.t … ok
t/verify.t … ok
t/wrap_call.t … ok

Test Summary Report
t/get_public_keys.t (Wstat: 0 Tests: 3 Failed: 3)
Failed tests: 1-3
t/get_secret_keys.t (Wstat: 0 Tests: 2 Failed: 2)
Failed tests: 1-2
Files=20, Tests=51, 2 wallclock secs ( 0.07 usr 0.06 sys + 1.47
cusr 0.43 csys = 2.03 CPU)
Result: FAIL
Failed 2/20 test programs. 5/51 subtests failed.
make: *** [test_dynamic] Error 255
sh-3.2#
sh-3.2#
sh-3.2#
sh-3.2# prove -lbv t/get_public_keys.t
t/get_public_keys.t …
1…3
not ok 1
not ok 2
not ok 3
subkeys fail comparison; this is a known issue with GnuPG 1.0.1 at t/
get_public_keys.t line 92.
Failed 3/3 subtests

Test Summary Report
t/get_public_keys.t (Wstat: 0 Tests: 3 Failed: 3)
Failed tests: 1-3
Files=1, Tests=3, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.07 cusr
0.02 csys = 0.12 CPU)
Result: FAIL

sh-3.2# prove -lbv t/get_secret_keys.t
t/get_secret_keys.t …
1…2
not ok 1
not ok 2
Failed 2/2 subtests

Test Summary Report
t/get_secret_keys.t (Wstat: 0 Tests: 2 Failed: 2)
Failed tests: 1-2
Files=1, Tests=2, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.07 cusr
0.01 csys = 0.11 CPU)
Result: FAIL
sh-3.2#

-BehzadOn Sep 23, 2009, at 6:11 AM, Ruslan Zakirov wrote:

May be setting umask to a stricter value will make all those tests
pass.

On Wed, Sep 23, 2009 at 5:02 PM, Jesse Vincent <jesse@bestpractical.com wrote:

$ sudo prove -blv t/get_public_keys.t
t/get_public_keys.t …
1…3
gpg: WARNING: unsafe permissions on homedir `test’
not ok 1
not ok 2
not ok 3
subkeys fail comparison; this is a known issue with GnuPG 1.0.1 at
t/
get_public_keys.t line 92.
Failed 3/3 subtests

Test Summary Report

Can you try to track down the source of that gpg warning? I suspect
that
it might be umask related. It may be that GnuPG 2.0 is being stricter
about something for homedir permissions.


http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users

Community help: http://wiki.bestpractical.com
Commercial support: sales@bestpractical.com

Discover RT’s hidden secrets with RT Essentials from O’Reilly Media.
Buy a copy at http://rtbook.bestpractical.com


Best regards, Ruslan.

Ok, I made the umask to be strict on the entire ‘test’ directory
(recursively), and ran the “make test”, and then "prove -lbv

You most certainly want -bv and not -lbv.

failing_cases "…and some of the warnings/errors went away.
However, there are still some more errors left (See Results shown
below).

Since some of these errors (See Results below) are indicating that
they are known issues with GnuPG 1.0.1, it begs the following
questions:

  1. What is the significance of the term “…known issues with GnuPG
    1.0.1…” (i.e., known to RT developers? or known to the GnuPG
    developers?)

Neither. To the original developer of GnuPg interface, a CPAN module
written to let Perl applications talk to GnuPg. You may note that we
now maintain thatm odule but that we didn’t originally write it.

  1. I have installed GnuPG 2.0.13, and do not have GnuPG 1.xx
    installed on my machine. Therefore why is it complaining about GnuPG
    1.0.1?

It’s a hardcoded warning statement in the test files. And unrelated
here.

Again, note that I have only created a symbolic link for
the executable “gpg” (supposedly the executable for GnuPG 1.x) to
point to “gpg2” (GnuPG 2.0.13). I only did this as “perl
Malefile.PL” for CPAN’s GnuPG-Interface would not have gone ahead,
as it obviously needed “gpg”.

That’s what might be referred to as “an end run around a safety
mechanism” GnuPg::Interface wasn’t designed to work with gpg2 and they
changed the API/CLI, which is part of what gets something a different
executable name.

In particular, gpg 1 outputs timestames as ISO dates and gpg 2 outputs
them as seconds since the epoch.

As it happens, I had a few minutes today and did the work to support
GPG2 in GnuPg::Interface. Can you try out:

http://pause.perl.org/incoming/GnuPG-Interface-0.41_01.tar.gz

and report back? If it’s more than a few hours, you’ll find that file
at search.cpan.org.

Copying the rt-users list.

-BehzadBegin forwarded message:

From: Behzad Mahini mahini@apple.com
Date: September 24, 2009 11:59:49 AM PDT
To: Jesse Vincent jesse@bestpractical.com
Cc: Jesse Vincent jesse@bestpractical.com, Ruslan Zakirov <ruslan.zakirov@gmail.com

Subject: Re: [rt-users] Problem RTIR Installation – CPAN’s
GnuPG::Interface tests failing

Jesse, Ruslan & Kevin,

That did it…Truly thank you, as the latest version of GnuPG-
nterface (0.41) fixed my problem, and all errors went away (…by
the way, I ignored the warnings for the test directory settings, as
they were similar to the past).

RTIR now shows up on my UI, and is accessible.

Best Regards,
Behzad
On Sep 24, 2009, at 11:04 AM, Jesse Vincent wrote:

On Wed 23.Sep’09 at 18:33:13 -0700, Behzad Mahini wrote:

Ok, I made the umask to be strict on the entire ‘test’ directory
(recursively), and ran the “make test”, and then "prove -lbv

You most certainly want -bv and not -lbv.

failing_cases "…and some of the warnings/errors went away.
However, there are still some more errors left (See Results shown
below).

Since some of these errors (See Results below) are indicating that
they are known issues with GnuPG 1.0.1, it begs the following
questions:

  1. What is the significance of the term “…known issues with GnuPG
    1.0.1…” (i.e., known to RT developers? or known to the GnuPG
    developers?)

Neither. To the original developer of GnuPg interface, a CPAN module
written to let Perl applications talk to GnuPg. You may note that we
now maintain thatm odule but that we didn’t originally write it.

  1. I have installed GnuPG 2.0.13, and do not have GnuPG 1.xx
    installed on my machine. Therefore why is it complaining about GnuPG
    1.0.1?

It’s a hardcoded warning statement in the test files. And unrelated
here.

Again, note that I have only created a symbolic link for
the executable “gpg” (supposedly the executable for GnuPG 1.x) to
point to “gpg2” (GnuPG 2.0.13). I only did this as “perl
Malefile.PL” for CPAN’s GnuPG-Interface would not have gone ahead,
as it obviously needed “gpg”.

That’s what might be referred to as “an end run around a safety
mechanism” GnuPg::Interface wasn’t designed to work with gpg2 and
they
changed the API/CLI, which is part of what gets something a different
executable name.

In particular, gpg 1 outputs timestames as ISO dates and gpg 2
outputs
them as seconds since the epoch.

As it happens, I had a few minutes today and did the work to support
GPG2 in GnuPg::Interface. Can you try out:

http://pause.perl.org/incoming/GnuPG-Interface-0.41_01.tar.gz

and report back? If it’s more than a few hours, you’ll find that
file
at search.cpan.org.