At_123 configure Makefile no good

The Asset Tracker 123
./configure --prefix=/usr/local/at-1.2.3
does NOT create a good Makefile.

The prefix is corrupt as I get:-
sudo make
Password:
mkdir -p //opt/rt3/local/etc/AssetTracker/
cp etc/AssetTracker/AT_Config.pm //opt/rt3/local/etc/AssetTracker/AT_Config.pm
[ -f //opt/rt3/local/etc/AssetTracker/AT_SiteConfig.pm ] || cp etc/AssetTracker/AT_SiteConfig.pm //opt/rt3/local/etc/AssetTracker/AT_SiteConfig.pm
chgrp rt //opt/rt3/local/etc/AssetTracker/AT_Config.pm
chgrp: rt: Invalid argument
*** Error code 1
Stop in /usr/home/rt_dev/Rt/at-1.2.3.

RT 387 running OK inf FreeBSD_8.

Had a quick look round and changing Makefile to reflect the correct PREFIX, but just makes things worse.

.

The Asset Tracker 123
./configure --prefix=/usr/local/at-1.2.3
does NOT create a good Makefile.

The prefix is corrupt as I get:-
sudo make
Password:
mkdir -p //opt/rt3/local/etc/AssetTracker/
cp etc/AssetTracker/AT_Config.pm //opt/rt3/local/etc/AssetTracker/AT_Config.pm
[ -f //opt/rt3/local/etc/AssetTracker/AT_SiteConfig.pm ] || cp etc/AssetTracker/AT_SiteConfig.pm //opt/rt3/local/etc/AssetTracker/AT_SiteConfig.pm
chgrp rt //opt/rt3/local/etc/AssetTracker/AT_Config.pm
chgrp: rt: Invalid argument
*** Error code 1
Stop in /usr/home/rt_dev/Rt/at-1.2.3.

RT 387 running OK inf FreeBSD_8.

Had a quick look round and changing Makefile to reflect the correct PREFIX, but just makes things worse.

.

Hi, try out the new at 1.24b1 from google code!

Torsten

----- Originalnachricht -----

Kuehne + Nagel (AG & Co.) KG, Geschaeftsleitung: Hans-Georg Brinkmann (Vors.), Dirk Blesius, Reiner Heiken, Bruno Mang, Alfred Manke, Christian Marnetté, Mark Reinhardt, Jens Wollesen, Rainer Wunn, Sitz: Bremen, Registergericht: Bremen, HRA 21928, USt-IdNr.: DE 812773878, Persoenlich haftende Gesellschaft: Kuehne & Nagel A.G., Sitz: Contern/Luxemburg Geschaeftsfuehrender Verwaltungsrat: Klaus-Michael KuehneVon: rt-users-bounces@lists.bestpractical.com rt-users-bounces@lists.bestpractical.com
An: rt-users@lists.bestpractical.com rt-users@lists.bestpractical.com
Gesendet: Mon Apr 19 16:58:15 2010
Betreff: [rt-users] at_123 configure Makefile no good

The Asset Tracker 123
./configure --prefix=/usr/local/at-1.2.3
does NOT create a good Makefile.

The prefix is corrupt as I get:-
sudo make
Password:
mkdir -p //opt/rt3/local/etc/AssetTracker/
cp etc/AssetTracker/AT_Config.pm //opt/rt3/local/etc/AssetTracker/AT_Config.pm
[ -f //opt/rt3/local/etc/AssetTracker/AT_SiteConfig.pm ] || cp etc/AssetTracker/AT_SiteConfig.pm //opt/rt3/local/etc/AssetTracker/AT_SiteConfig.pm
chgrp rt //opt/rt3/local/etc/AssetTracker/AT_Config.pm
chgrp: rt: Invalid argument
*** Error code 1
Stop in /usr/home/rt_dev/Rt/at-1.2.3.

RT 387 running OK inf FreeBSD_8.

Had a quick look round and changing Makefile to reflect the correct PREFIX, but just makes things worse.

.

Discover RT’s hidden secrets with RT Essentials from O’Reilly Media.
Buy a copy at http://rtbook.bestpractical.com

This looks like that often seen at the rear of a cow!
The install has “dropdb” in it!
Ummm - a naming problem !

Now - where 1.24b1 downloadable from ?

Still getting horrible make install errors.

I ONLY have the latest RTFM on top of RT387 though.

IanFrom: “Brumm, Torsten / Kuehne + Nagel / Ham MI-ID” torsten.brumm@Kuehne-Nagel.com
To: ipellew@yahoo.com; rt-users@lists.bestpractical.com
Sent: Mon, 19 April, 2010 17:01:39
Subject: AW: [rt-users] at_123 configure Makefile no good

Hi, try out the new at 1.24b1 from google code!

Torsten

----- Originalnachricht -----
Von: rt-users-bounces@lists.bestpractical.com rt-users-bounces@lists.bestpractical.com
An: rt-users@lists.bestpractical.com rt-users@lists.bestpractical.com
Gesendet: Mon Apr 19 16:58:15 2010
Betreff: [rt-users] at_123 configure Makefile no good

The Asset Tracker 123
./configure --prefix=/usr/local/at-1.2.3
does NOT create a good Makefile.

The prefix is corrupt as I get:-
sudo make
Password:
mkdir -p //opt/rt3/local/etc/AssetTracker/
cp etc/AssetTracker/AT_Config.pm //opt/rt3/local/etc/AssetTracker/AT_Config.pm
[ -f //opt/rt3/local/etc/AssetTracker/AT_SiteConfig.pm ] || cp etc/AssetTracker/AT_SiteConfig.pm //opt/rt3/local/etc/AssetTracker/AT_SiteConfig.pm
chgrp rt //opt/rt3/local/etc/AssetTracker/AT_Config.pm
chgrp: rt: Invalid argument
*** Error code 1
Stop in /usr/home/rt_dev/Rt/at-1.2.3.

RT 387 running OK inf FreeBSD_8.

Had a quick look round and changing Makefile to reflect the correct PREFIX, but just makes things worse.

.

Discover RT’s hidden secrets with RT Essentials from O’Reilly Media.
Buy a copy at http://rtbook.bestpractical.com

Kühne + Nagel (AG & Co.) KG, Geschäftsleitung: Hans-Georg Brinkmann (Vors.), Dirk Blesius, Reiner Heiken, Bruno Mang, Alfred Manke, Christian Marnetté, Mark Reinhardt, Jens Wollesen, Rainer Wunn, Sitz: Bremen, Registergericht: Bremen, HRA 21928, USt-IdNr.: DE 812773878, Persönlich haftende Gesellschaft: Kühne & Nagel A.G., Sitz: Contern/Luxemburg, Geschäftsführender Verwaltungsrat: Klaus-Michael Kühne

Search for asset tracker4rt inside google!

The you grab lastest!

TorstenVon: Ian Pellew ipellew@yahoo.com
An: Brumm, Torsten / Kuehne + Nagel / Ham MI-ID
Cc: RT List rt-users@lists.bestpractical.com
Gesendet: Mon Apr 19 17:54:43 2010
Betreff: Re: AW: [rt-users] at_123 configure Makefile no good

This looks like that often seen at the rear of a cow!
The install has “dropdb” in it!
Ummm - a naming problem !

Now - where 1.24b1 downloadable from ?

Still getting horrible make install errors.

I ONLY have the latest RTFM on top of RT387 though.

Ian

From: “Brumm, Torsten / Kuehne + Nagel / Ham MI-ID” torsten.brumm@Kuehne-Nagel.com
To: ipellew@yahoo.com; rt-users@lists.bestpractical.com
Sent: Mon, 19 April, 2010 17:01:39
Subject: AW: [rt-users] at_123 configure Makefile no good

Hi, try out the new at 1.24b1 from google code!

Torsten

----- Originalnachricht -----
Von: rt-users-bounces@lists.bestpractical.com rt-users-bounces@lists.bestpractical.com
An: rt-users@lists.bestpractical.com rt-users@lists.bestpractical.com
Gesendet: Mon Apr 19 16:58:15 2010
Betreff: [rt-users] at_123 configure Makefile no good

The Asset Tracker 123
./configure --prefix=/usr/local/at-1.2.3
does NOT create a good Makefile.

The prefix is corrupt as I get:-
sudo make
Password:
mkdir -p //opt/rt3/local/etc/AssetTracker/
cp etc/AssetTracker/AT_Config.pm //opt/rt3/local/etc/AssetTracker/AT_Config.pm
[ -f //opt/rt3/local/etc/AssetTracker/AT_SiteConfig.pm ] || cp etc/AssetTracker/AT_SiteConfig.pm //opt/rt3/local/etc/AssetTracker/AT_SiteConfig.pm
chgrp rt //opt/rt3/local/etc/AssetTracker/AT_Config.pm
chgrp: rt: Invalid argument
*** Error code 1
Stop in /usr/home/rt_dev/Rt/at-1.2.3.

RT 387 running OK inf FreeBSD_8.

Had a quick look round and changing Makefile to reflect the correct PREFIX, but just makes things worse.

.

Discover RT’s hidden secrets with RT Essentials from O’Reilly Media.
Buy a copy at http://rtbook.bestpractical.com http://rtbook.bestpractical.com/

Kühne + Nagel (AG & Co.) KG, Geschäftsleitung: Hans-Georg Brinkmann (Vors.), Dirk Blesius, Reiner Heiken, Bruno Mang, Alfred Manke, Christian Marnetté, Mark Reinhardt, Jens Wollesen, Rainer Wunn, Sitz: Bremen, Registergericht: Bremen, HRA 21928, USt-IdNr.: DE 812773878, Persönlich haftende Gesellschaft: Kühne & Nagel A.G., Sitz: Contern/Luxemburg, Geschäftsführender Verwaltungsrat: Klaus-Michael Kühne

Try this one.
Google Code Archive - Long-term storage for Google Code Project Hosting. Ian Pellew ipellew@yahoo.com

This looks like that often seen at the rear of a cow!
The install has “dropdb” in it!
Ummm - a naming problem !

Now - where 1.24b1 downloadable from ?

Still getting horrible make install errors.

I ONLY have the latest RTFM on top of RT387 though.

Ian


From: “Brumm, Torsten / Kuehne + Nagel / Ham MI-ID”
torsten.brumm@Kuehne-Nagel.com
To: ipellew@yahoo.com; rt-users@lists.bestpractical.com
Sent: Mon, 19 April, 2010 17:01:39
Subject: AW: [rt-users] at_123 configure Makefile no good

Hi, try out the new at 1.24b1 from google code!

Torsten

----- Originalnachricht -----
Von: rt-users-bounces@lists.bestpractical.com <
rt-users-bounces@lists.bestpractical.com>
An: rt-users@lists.bestpractical.com rt-users@lists.bestpractical.com
Gesendet: Mon Apr 19 16:58:15 2010
Betreff: [rt-users] at_123 configure Makefile no good

The Asset Tracker 123
./configure --prefix=/usr/local/at-1.2.3
does NOT create a good Makefile.

The prefix is corrupt as I get:-
sudo make
Password:
mkdir -p //opt/rt3/local/etc/AssetTracker/
cp etc/AssetTracker/AT_Config.pm
//opt/rt3/local/etc/AssetTracker/AT_Config.pm
[ -f //opt/rt3/local/etc/AssetTracker/AT_SiteConfig.pm ] || cp
etc/AssetTracker/AT_SiteConfig.pm
//opt/rt3/local/etc/AssetTracker/AT_SiteConfig.pm
chgrp rt //opt/rt3/local/etc/AssetTracker/AT_Config.pm
chgrp: rt: Invalid argument
*** Error code 1
Stop in /usr/home/rt_dev/Rt/at-1.2.3.

RT 387 running OK inf FreeBSD_8.

Had a quick look round and changing Makefile to reflect the correct PREFIX,
but just makes things worse.

.

Discover RT’s hidden secrets with RT Essentials from O’Reilly Media.
Buy a copy at http://rtbook.bestpractical.com

Kühne + Nagel (AG & Co.) KG, Geschäftsleitung: Hans-Georg Brinkmann
(Vors.), Dirk Blesius, Reiner Heiken, Bruno Mang, Alfred Manke, Christian
Marnetté, Mark Reinhardt, Jens Wollesen, Rainer Wunn, Sitz: Bremen,
Registergericht: Bremen, HRA 21928, USt-IdNr.: DE 812773878, Persönlich
haftende Gesellschaft: Kühne & Nagel A.G., Sitz: Contern/Luxemburg,
Geschäftsführender Verwaltungsrat: Klaus-Michael Kühne

Discover RT’s hidden secrets with RT Essentials from O’Reilly Media.
Buy a copy at http://rtbook.bestpractical.com

MFG

Torsten Brumm

http://www.brumm.me
http://www.elektrofeld.de

I was expecting a version like 1.2.4.b1 to download !

.

Aehh?!? There is under Tags:

http://code.google.com/p/asset-tracker-4rt/source/browse/#svn/at/tags/1.2.4b1

Kuehne + Nagel (AG & Co.) KG, Geschaeftsleitung: Hans-Georg Brinkmann (Vors.), Dirk Blesius, Reiner Heiken, Bruno Mang, Alfred Manke, Christian Marnetté, Mark Reinhardt, Jens Wollesen, Rainer Wunn, Sitz: Bremen, Registergericht: Bremen, HRA 21928, USt-IdNr.: DE 812773878, Persoenlich haftende Gesellschaft: Kuehne & Nagel A.G., Sitz: Contern/Luxemburg Geschaeftsfuehrender Verwaltungsrat: Klaus-Michael KuehneVon: rt-users-bounces@lists.bestpractical.com [mailto:rt-users-bounces@lists.bestpractical.com] Im Auftrag von Ian Pellew
Gesendet: Dienstag, 20. April 2010 08:59
An: Torsten Brumm
Cc: RT List
Betreff: Re: [rt-users] at_123 configure Makefile no good

I was expecting a version like 1.2.4.b1 to download !

.

The URI http://rt3.fsck.com//Ticket/Display.html?id=12521
in Google Code Archive - Long-term storage for Google Code Project Hosting.
points to a live RT login !!
I think you are implying a patch for 387 ?

I am in FreeBSD 8 where both configure and the generated Makefile are a long way from.
The ‘make install’ includes a dropdb, well - drop AT tables - that do not exist, so fails
I create them manually OK, but do I need to populate them, maybe from a config option in the AT menu ?
The at-setup-database action seems to be setting up RT from scratch - so possibly AT is not going to be part of my RT, so I have got it all wrong?

I guess there might also be something to do in RT to get to the AT pages/menus.

I have not played with the likes of configure before, I am more use to the likes of HP/AIX installs, so lack the knowledge of how to tweek for multi platform environments. Configure is prity heavy going, even for the keenest Unixer.

.

Hi Ian

The URI http://rt3.fsck.com//Ticket/Display.html?id=12521

in
Google Code Archive - Long-term storage for Google Code Project Hosting.
points to a live RT login !!
I think you are implying a patch for 387 ?

There is a REST API Patch for 3.8.1, you can login there public with
guest/guest

I am in FreeBSD 8 where both configure and the generated Makefile are a
long way from.
The ‘make install’ includes a dropdb, well - drop AT tables - that do not
exist, so fails
I create them manually OK, but do I need to populate them, maybe from a
config option in the AT menu ?
The at-setup-database action seems to be setting up RT from scratch - so
possibly AT is not going to be part of my RT, so I have got it all wrong?

Ok, never tried this under FreeBSD, but under RH/CENTOS/UBUNTU/DEBIAN it
works smooth so far.

Have you read the documentation and followed them???

I guess there might also be something to do in RT to get to the AT
pages/menus.

Yes, after install, restart apache and clean mason cache

I have not played with the likes of configure before, I am more use to the
likes of HP/AIX installs, so lack the knowledge of how to tweek for multi
platform environments. Configure is prity heavy going, even for the keenest
Unixer.

normally it is straight forward.

.

Discover RT’s hidden secrets with RT Essentials from O’Reilly Media.
Buy a copy at http://rtbook.bestpractical.com

MFG

Torsten Brumm

http://www.brumm.me
http://www.elektrofeld.de